Arctic Spas Voice Commands
IMPORTANT: If the user names their spa, they must use the spa’s name and not just “my arctic spa” or Alexa won’t work. E.x. if you name your spa “Yocto” you cannot say “make my arctic spa hotter,” you must say “make yocto hotter”.
Spas take the users preferred temperature units by default. To give a celsius command you must say ‘celsius’ after the number (E.x. increase yocto by 5 degrees celsius).
- What is [spa name] set to? (Reports the current Setpoint
- What is the temperature of [spa name] reports the current temperature
- What is [spa name]’s temperature
- Set the temperature on [spa name] to x (changes the setpoint to x. Say “x celsius or xdegrees celsius” to give a celsius value)
- Make [spa name] warmer/hotter (increases temperature incrementally by 2 Fahrenheit)
- Make [spa name] cooler/colder (decreases temperature incrementally by 2 Fahrenheit)
- Increase [spa name] by x degrees (increases set temperature by xDecrease [spa name] by x degrees (decreases set temperature by x)
- Turn on/off the lights on [spa name] (turns the lights on or offTurn [spa name]’s lights on/off
- Turn on/off pump x on [spa name] (turns pump x on or off)
- Turn [spa name]’s pump x on/off
- The following commands only work on Coldfire (Not Yocto)
- Turn on everything on [spa name] (activates all pumps and the lights)
- Turn off everything on [spa name] (deactivates all pumps and the lights)
- Turn on easy mode on [spa name] (activates all pumps and the lights)
- Turn [spa name]’s easy mode on
- Turn off easy mode on [spa name] (deactivates all pumps and the lights)
- Turn [spa name]’s easy mode off